Back in June I wrote about what attracts me to Vintage Audio. I discussed several factors, like style, craftsmanship and environmental friendliness. I ended by highlighting the intangible value of a piece’s story.
Sometimes the story is about the item itself (who owned it, how it came to the seller, what it was used for in the past) and others it’s more about the manufacturer and model (innovations, where it fits in a brand’s history).
For example, my Sansui AU-555 was given to my brother in the early ‘80s by his boss at his part-time furniture re-finishing job. After sitting in his basement for decades, it came to me 5 years ago, and the hand-me-down tale adds to the special feelings I have for it.
My KEF Calinda speakers were some of the first ever speakers to feature cabinet and driver placement designed on computers; speaker technology has moved on since 1976, but knowledge of that innovation enhances these speakers’ value in my mind.
I recently purchased a new (to me) vintage turntable, and this one also involves stories, both of seller and buyer.
In early 2019, as I was just getting back into vinyl, my Instagram friend Kevin (@mistachen) shot me a message about a turntable for sale that he thought would be a good step up for me. An Empire Troubador 598 (forget which model). C$450. Beautiful. The photos don’t even do this remarkable turntable justice.
Having just gotten my first turntable a few months before, and not knowing too much about what was what, I hardly even knew what I was looking at. Old for sure, and sexy, and shiny-champagne-gold. Intimidating. Too much turntable for my system of the time. I dithered. It sold. I didn’t think too much of it.
I’d like to think my turntable knowledge has improved since then. Just a bit. Over the intervening 30 months, every now and then an Empire would pop up on my Instagram feed or in a Facebook audio group and I’d drool. Still sexy. Not so intimidating anymore. Less overkill for my evolving system. I’d flash back to the one I passed on and think, “What if?”
I follow quite a few vintage audio sellers and restorers on Instagram. I get amazingly satisfying, vicarious pleasure from watching restoration projects progress and unfold, and then seeing the end-result pieces available for sale or integrated into working systems.
![Empire 598 Troubador III Turntable Story Post](images/empire-598-troubador-iii-turntable-story-post.jpg)
Sometimes pieces show up fully fledged, with no restoration story. That’s fine; I can still admire, drool and covet. About a month ago, a post popped up on Instagram from @woostervintageaudio in Ohio featuring an exquisite Empire 598 Troubadour III for sale.
Beautiful, but not a realistic purchase for me as I prefer to buy local, particularly when it comes to turntables (I see too many unboxing posts of destroyed equipment, poorly packaged by the seller or poorly handled by the courier, and don’t want to take chances either way).
Figuring someone would be interested, I shared the Empire post in my IG story. Not sure if it drew any traffic for Wooster, but a few hours later I got a personal message from Dan (@iloveyoucoffeeshop), a local Instagram connection, saying his uncle was looking to sell an Empire and asking if I’d be interested.
![Instagram Message from Dan](images/ig-message-from-dan.jpg)
A few days and messages back and forth later, I got an email with photos from his uncle, Sam, and a couple of days after that I popped over for an up-close look.
A few years ago, Sam took care of a house and dog for a friend for several weeks and was given the Empire (and some other equipment) in lieu of cash payment. That became part of his sizzling audio set-up for the next few years.
Then recently his son downsized from house to apartment, couldn’t accommodate a full-sized audio system, and passed it on to him. Now Sam’s living area was overrun with audio equipment, and the Empire was assigned to the surplus-to-requirements list.
Everything seemed fine with the player, barring what sounded like a minor suspension issue and a couple of blemishes to the champagne gold finish on the platter (a common issue I understand, and not surprising with a 50 year-old piece). The price was more than reasonable, and into the back of my car it went.
So what’s so special about the Empire 598 then, besides its retro-magic looks?
The early ‘70s brochure states: “The turntable was designed to far exceed professional standards of performance… Long life and trouble-free operation are guaranteed… by an ingenious turntable design that involves only two moving parts, a powerful hysteresis synchronous motor and a heavy aluminium turntable platter individually balanced to the peak of perfection. Finally, the handsome and functional looks will enhance any room. This is the world’s most perfect record playback system. With cast aluminium platter, fitted with the Empire 990 Tonearm.”
I can’t really argue with that. The 598 Troubador was introduced in 1970 and stayed in production until 1976. Some will argue that its predecessor, the 498, was better, but there aren’t many of those around and the 598 is the one you see most often. The 698 that followed coincided with a change of ownership (and decline in Empire’s fortunes) and was rife with performance issues.
There were multiple iterations of the belt-driven 598 (you’ll see Mark I, II and III). It’s not 100% clear what the differences are and in some cases it seems parts and specifications are somewhat interchangeable.
There’s a good thread on AudioKarma about the history of Empire and their turntables.
The one now in my basement is the two-speed (33.33 and 45 rpm) Mark II, with a 12″ cast aluminium, two-piece platter (the drive portion is 7 lbs and 3 inches thick; once in motion, it acts as a massive flywheel which helps maintain accurate speed).
It features a dynamically balanced hysteresis synchronous motor, micro-honed oilite main bearings, pneumatic suspension, and Empire’s own 990 tonearm.
All of this goodness is mounted on a heavy wood plinth with impressive wood-and-glass flip-up cover. Ideally there’d be an Empire cartridge installed, but the Pickering VX-15 it came with sounds very nice.
The suspension issue noted at purchase (the platter rubbed on the top plate on one side) was easily repaired by adjusting the three wingnuts that attach the platter mechanism to the plinth on the underside. That taken care of, the table operates almost flawlessly. Speed is incredibly accurate, wow and flutter almost non-existent, and sound is superb, with no perceptible rumble, hum or other background noise.
If I have one gripe, it is with the auto-lift function at the end of a record, which is finicky. The mechanism is magnetic and engages via a metal piece protruding from the pivot end of the tonearm.
As the record ends and the stylus enters the lead out grooves, the protrusion gets closer to the magnetic arm lifter, which lifts and pulls the arm up and over at the same time.
With most records the arm lift works fine, but those with a narrow lead-out groove are a problem as the lift mechanism engages before the music is over, with a loud, jarring sound that gives an unsatisfying ending to the final track.
My initial solution to this issue was to use one of my other turntables for records with less than a centimeter of lead-out, but I then learned that the auto-lift can be disengaged by tilting the lift column, making the table fully manual.
Not perfect, but a reasonable workaround. At least I’m not forced to choose which turntable I’ll use based on how nightmarish my end-of-record experience will be.
Minor gripes aside, this Empire Troubadour is absolutely a keeper. It’s not surprising that Empire turntables, back in the early ‘70s, were considered “top tier” along with Rek-O-Kut, Thorens and Acoustic Research, and used as transcription players by radio stations across North America. I’m honoured to own one of these beauties, and love having another piece of music history in my listening room.
And that’s the story of the Empire. If you’d like to see more, hop onto my Instagram at @audioloveyyc for a lot of pictures of the 598 and what I’m spinning on it. I’ll leave you there, and hopefully this lead-out is smoother than some of my early Empire 598 record spins.
![](images/ecoustics-logo-200x50-small.png)
Larry Casey
October 25, 2021 at 4:07 pm
Sweet setup.
Tubes and vinyl ahhh yes please
happy spinning
Eric Pye
October 25, 2021 at 6:46 pm
Cheers Larry. Yeah, can’t go wrong with that combo!
B T Tan
October 26, 2021 at 10:15 pm
What an impressive turntable! Beautifully made! Enjoy your Empire to the fullest!
Eric Pye
October 27, 2021 at 6:09 pm
Cheers. That’s the plan!
Warren R Keppler
October 25, 2021 at 5:51 pm
Nice review, love that you are review these great vintage pieces.
Eric Pye
October 25, 2021 at 6:46 pm
Thanks Warren. Nice to know there are others – lots of others – out there who still love the vintage vibe!
Ian White
October 25, 2021 at 7:16 pm
You’ve created a monster Eric. I’ve been looking at these all night online.
Sigh. Watches money go out the door.
Ian
Louis McFarlane
October 26, 2021 at 12:25 pm
Great pictures.
I have seen these before but never had the opportunity to listen to one.
I still have a Garrard 401, AR-XA and an Oracle Delphi.
I love the build quality of this genertion turntable and am glad to see i’m not the only vinyl nutcase.
Ian White
October 26, 2021 at 12:38 pm
Louis,
We’re a tad nuts here in regard to turntables. The Oracle is a wonderful design. I always liked their tables.
Best,
Ian White
Eric Pye
October 26, 2021 at 2:29 pm
Yup, we’re all nuts. Would love the opportunity someday to hear the models you mention. For now, I “settle” for the Troubador.
NJ Flanigan
October 27, 2021 at 1:16 am
when you look at the offerings from Rega it does not make sense (to me any way) to buy vintage.
Ian White
October 27, 2021 at 1:39 am
NJ,
My fully tricked out Thorens TD-125 crushes the Planar 3. In every way. Fully restored and with a better arm and Denon DL-103.
I love Rega’s tables but there are some very good vintage tables that are superior.
Ian White
Bryant Michaud
April 3, 2022 at 12:17 pm
Read your saga on the Empire 598 Troubador, which I have owned since 1971 (that’s right, 51 years!) I have had to re-construct the plinth because the original was damaged in a move, so it gave me the opportunity to improvise on the positioning of the motor capacitor and other electrical components under the platter. I also installed a grounded AC power cord, which helped reduce hum (it had never been a huge problem anyway). The results speak for themselves; this turntable is yet to be challenged for rumble and mechanical feedback figures — and that makes it the beauty that it STILL is. Don’t dare sell it. I’m having mine inserted into my coffin! (LOL)
Eric Pye
April 16, 2022 at 6:03 pm
No plans to sell it, Bryant. And yes, I’m loving it. Rather than having it inserted in your coffin, it could BE your coffin! Massive 😉
Gaetano Selandari
June 30, 2022 at 8:09 am
Hello Larry from Italy; very interesting article. I own a 598 mkIII 220 Volts with high satisfaction. Mine has the wood an GLASS cover. I have seen some with plastic plexiglass covers, may be they did change production in the meanwhile, mystery! Very best regard. Gaetano
tonyE
November 6, 2023 at 7:18 am
Aaah.. vintage.
Sure, it looks very good, but by the early/mid 70s we had the Ariston, Linn, AR and Technics tables which were by then the High End.
The Pickering XV15/625E was a fine cartridge… I had one in my Kenwood belt table, back in ’75. Sounded really good but it was beat -no, trounced!- by the Stanton 681EEE -which I got later in ’77.
I understand you are getting in love with the looks of those vintage tables and components… but their sound is not all that accurate… if you want nostalgia looks but state of the art work get a used Linn LP12 with Lingo, Trampolin, Karousel and Ittok… plus a nice modern cartridge.
I believe I commented on this earlier. I must sound like a -pun- broken record -/pun- but it is true.
Sure your vintage table looks great, like a nice 66 Mustang, but I’ll take the modern car with traction control, ABS and computer control mechanicals.